PF-6110:
205 HP Cummins QSB 6.7 Tier 3 electronic engine w/ CAC diesel engine ·
80 gallon fuel tank · 14.4 Ton hopper capacity · Paving width of 10’ std. and 26’ Max
·
Tension-driven,
continuous rubber track · 2-speed planetaries and 2-speed
motors capable of 0-10 mph · Continuous, flexible high speed rubber track with a width of
19" · Dual control stations each with a seat, steering and direction/speed
control pedestal · Independent control of the auger and conveyor ·
Hydraulic tension conveyor chains · On board 30KW generator · 17" Augers are
hydraulically adjustable in height. Ventilation system extracts heat and
fumes from the auger and screed area and vents it through the exhaust stack ·
Power Tunnel Synchronization ·
A wide variety of options and accessories are available to tailor this paver to your
specific paving needs
PF-6160/70:
205 HP Cummins QSB 6.7 Tier 3 electronic engine w/ CAC diesel engine ·
80 gallon fuel tank · 14.4 Ton hopper capacity · Paving width of 10’ std. and 26’ Max
·
Tension-driven,
continuous rubber track · 2-speed planetaries and 2-speed
motors capable of 0-12 mph · 18 x 25 drive tires · Level Load steering
suspension · Dual control stations each with a seat, steering and
direction/speed control pedestal · Independent control of the auger and
conveyor ·
Hydraulic tension conveyor chains · On board 30KW generator · 17" Augers are
hydraulically adjustable in height. Ventilation system extracts heat and
fumes from the auger and screed area and vents it through the exhaust stack ·
Power Tunnel Synchronization ·
A wide variety of options and accessories are available to tailor this paver to your
specific paving needs
PF-5510: 184 HP Cummins
Elite 6BTA5.9-C174 diesel engine · Overall dimensions (with power extendable screed)
20’5"L x 12’6"H x 10’4"W, 36,520 lbs. · 54 gallon fuel
tank · 13.6 Ton hopper capacity · Paving width of 8’-10’ std. and 27’ Max
· Independent, hydrostatic direct drive for each track · 2-speed planetaries and 2-speed
motors capable of 0-10 mph · Continuous, flexible high speed rubber track with a width of
20" · Dual control stations each with a seat, steering and direction/speed control
pedestal · Separately operated, electric/hydraulic controlled, adjustable flow gates ·
16" Augers are hydraulically adjustable in height. Ventilation system
extracts heat and fumes from the auger and screed area and vents it above the operator ·
A wide variety of options and accessories are available to tailor this paver to your
specific paving needs
PF-4410: 145 HP Cummins
"Elite" 6BTA5.9-145 series diesel engine · Overall dimensions (with power
extendable screed) 17'3"L x 10' 3"H (to the muffler top) x 8' 2"W (with
hopper sides up)
· 38 gallon fuel tank · 8.5 ton hopper capacity · Paving width of 8' std to 25' max. ·
Independant hydrostatic direct drive system for each track · single speed planetaries
and 2-speed motors capable of 0-8.5 mph · Continuous flexible high speed EzRider rubber
track with a width of 14" · Dual control stations each with a seat, steering and
direction/speed control pedestal · Separately operated, electric/hydraulic controlled,
adjustable flow gates · 16" Augers are hydraulically adjustable in height ·
Ventilation system extracts heat and fumes from the auger and screed area and
vents it above the operator · A wide variety of options and accessories are available to
tailor this paver to your specific paving needs
Rubber
Tire Pavers
PF-3200: 184 HP Cummins 6BTA5.9-C174
diesel engine · Overall dimensions (with power extendable screed) 21’9"L x
12’6"H x 10’4"W, 36,520 lbs. · 54 gallon fuel tank ·
14 Ton hopper
capacity · Paving width of 8’-10’ std. and 27’ Max · Independent,
hydrostatic direct drive system · 2-speed planetaries and 2-speed motors capable of
0-10.7 mph · Tires are (2) 18.00 x 25 low pressure high flotation on rear and (4)
14"W x 22" diam. solid rubber front · Dual control stations each with a seat,
steering and direction/speed control pedestal · Separately operated, electric/hydraulic
controlled, adjustable flow gates · 16" Augers are hydraulically adjustable in
height · Ventilation system extracts heat and fumes from the auger and screed
area and vents it above the operator · A wide variety of options and accessories are
available to tailor this paver to your specific paving needs
PF-3172: 145 HP Cummins
6BT5.9-C145 diesel
engine · Overall dimensions (with power extendable screed) 19’8"L x
12’6"H x 10’4"W, 32,390 lbs. · 54 gallon fuel tank · 11.4 Ton hopper
capacity · Paving width of 8’-10’ std. and 21’ Max · Independent,
hydrostatic direct drive system · 2-speed planetaries and 2-speed motors capable of 0-10
mph · Tires are (2) 16.00 x 24 low pressure high flotation on rear and (4) 12"W x
22" diam. solid rubber front · Dual control stations each with a seat, steering and
direction/speed control pedestal · Separately operated, electric/hydraulic controlled,
adjustable flow gates · 16" Augers are hydraulically adjustable in height ·
Ventilation system extracts heat and fumes from the auger and screed area and
vents it above the operator · A wide variety of options and accessories are available to
tailor this paver to your specific paving needs
PF-161: 107 HP Cummins 4BTA3.9
diesel engine · Overall dimensions (with power extendable screed) 17’8-3/8"L x
12’5"H x 10’5"W, 21,750 lbs. · 38 gallon fuel tank · 9.8 Ton hopper
capacity · Paving width of 6’-10’ std. and 19’ Max · Independent,
hydrostatic direct drive system · 1 speed planetaries and 2-speed motors capable of
0-11.5 mph · Tires are (2) 14.00 x 20 low pressure high flotation on rear and (4)
12"W x 22" diam. solid rubber front · Dual control stations each with a seat,
steering and direction/speed control pedestal · Separately operated, electric/hydraulic
controlled, adjustable flow gates · 16" Augers are hydraulically adjustable in
height · Ventilation system extracts heat and fumes from the auger and screed
area and vents it above the operator · A wide variety of options and accessories are
available to tailor this paver to your specific paving needs
PF-150:
47 HP Deutz F3L912
diesel engine · Overall dimensions 15’3"L x 9’9"H x 10’5"W,
15,290 lbs. · 30 gallon fuel tank · 7 Ton hopper capacity · Paving width of
6’-13’ · Independent, hydrostatic direct drive system
· 3-speed transmission/transaxle capable of 0-11.6 mph · Tires are (2) 14.00 x 20 low
pressure high flotation on rear and (2) 12"W x 22" diam. solid rubber front ·
Single, moveable control station with (2) operator seats · (2) manually adjustable flow
gates · A wide variety of options and accessories are available to tailor this paver to
your specific paving needs
Road
Wideners
RW-195D: 180
HP John Deere 6068T diesel engine · Overall dimensions 27’3""L x
10’4"H x 11’11"W, 33,000 lbs. · 40 gallon fuel tank · 73 ft3 hopper
capacity · Working width of 2’-10’ std. and 14’ Max · 4-wheel hydrostatic
drive system · 4-wheel, 4-mode steering · 3-speed transmission capable of 0-13.6 mph ·
Tires are (4) 15.00 x 22.5 16-ply pneumatic · Dual control stations with a single
moveable seat and control pedestal · 30" wide conveyor capable of discharging
material from either side of machine · A wide variety of options and accessories are
available to tailor this unit to your specific needs
RW-100A: 110 HP John Deere
4045T diesel engine · Overall dimensions 25’6""L x 8’1"H x
10’10"W, 24,520 lbs. · 68 gallon fuel tank · 72.5 ft3 hopper
capacity · Working width of 1’-10’ · Hydrostatic drive system · 3-speed
transmission capable of 0-13.4 mph · Tires are (4) 15.00 x 22.5 16-ply pneumatic · Dual
control stations with a single moveable seat and control pedestal · 21" wide
conveyor capable of discharging material from either side of machine · A wide variety of
options and accessories are available to tailor this unit to your specific needs
Mobile
Conveyor
MC-330: 184 HP Cummins Elite 6BTA5.9 diesel engine · Overall
dimensions 56’10"L (with swing conveyor) x 12’4"H x
10’6-3/8"W, 54,100 lbs. · 14 ton hopper capacity · Built-in surge capacity of
approx. 30 tons · Hydrostatic drive system · 3-speed transmission and 2-speed
differential capable of 0-14.7 mph · (4) 16.00 x 24 heavy duty pneumatic G2 grader rear
tires, (2) 12"W x 22" diam. and (2) 14"W x 22" diam. solid rubber
front tires · Dual control stations each with a seat, steering and direction/speed
control pedestal · Positive Drive, Belt Conveyors 60" wide main and 36" wide
swing · A wide variety of options and accessories are available to tailor this unit to
your specific needs
Note: All
specifications subject to change with out notice.
diesel engine · Overall dimensions 27’3""L x
10’4"H x 11’11"W, 33,000 lbs. · 40 gallon fuel tank · 73 ft3 hopper
capacity · Working width of 2’-10’ std. and 14’ Max · 4-wheel hydrostatic
drive system · 4-wheel, 4-mode steering · 3-speed transmission capable of 0-13.6 mph ·
Tires are (4) 15.00 x 22.5 16-ply pneumatic · Dual control stations with a single
moveable seat and control pedestal · 30" wide conveyor capable of discharging
material from either side of machine · A wide variety of options and accessories are
available to tailor this unit to your specific needs 
25’6""L x 8’1"H x
10’10"W, 24,520 lbs. · 68 gallon fuel tank · 72.5 ft3 hopper
capacity · Working width of 1’-10’ · Hydrostatic drive system · 3-speed
transmission capable of 0-13.4 mph · Tires are (4) 15.00 x 22.5 16-ply pneumatic · Dual
control stations with a single moveable seat and control pedestal · 21" wide
conveyor capable of discharging material from either side of machine · A wide variety of
options and accessories are available to tailor this unit to your specific needs